References
Callister, William D. 2007. Materials Science and Engineering: An
Introduction. Seventh edition. New York, NY: Wiley.
Hanein, Theodore, Frederik P. Glasser, and Marcus N. Bannerman. 2017.
“One-Dimensional Steady-State Thermal Model for Rotary Kilns Used
in the Manufacture of Cement.” Advances in Applied
Ceramics 116 (4): 207–15. https://doi.org/10.1080/17436753.2017.1303261.
Kee, Robert J., Michael E. Coltrin, Peter Glarborg, and Huayang Zhu.
2017. Chemically Reacting Flow Theory, Modeling, and Simulation:
Theory, Modeling, and Simulation. Wiley & Sons, Incorporated,
John.
Kiradjiev, Kristian B., Svenn Anton Halvorsen, Robert A. Van Gorder, and
Sam D. Howison. 2019. “Maxwell-Type Models for the Effective
Thermal Conductivity of a Porous Material with Radiative Transfer in the
Voids.” International Journal of Thermal Sciences 145:
106009. https://doi.org/10.1016/j.ijthermalsci.2019.106009.
Maliska, Clovis R. 2004. Transferência de Calor e
Mecânica Dos Fluidos Computacional. 2nd ed. Rio de
Janeiro: LTC.
Onsager, Lars. 1931a. “Reciprocal Relations in Irreversible
Processes. i.” Physical Review 37: 405–26.
———. 1931b. “Reciprocal relations in
irreversible processes. II.” Physical Review 38:
2265–79.
Patankar, Suhas V. 1980. Numerical Heat Transfer and Fluid
Flow. Taylor & Francis. https://doi.org/10.1201/9781482234213.
Sadeghi, Hosein, Simo Hostikka, Guilherme Crivelli Fraga, and Hadi
Bordbar. 2021. “Weighted-Sum-of-Gray-Gases Models for Non-Gray
Thermal Radiation of Hydrocarbon Fuel Vapors, CH4,
CO and Soot.” Fire Safety Journal 125
(October): 103420. https://doi.org/10.1016/j.firesaf.2021.103420.
Singh, B. P., and M. Kaviany. 1994. “Effect of Solid Conductivity
on Radiative Heat Transfer in Packed Beds.” International
Journal of Heat and Mass Transfer 37 (16): 2579–83. https://doi.org/10.1016/0017-9310(94)90295-X.
Slycke, J., and T. Ericsson. 1981. “A Study of Reactions Occurring
During the Carbonitriding Process Part II.” Journal of Heat
Treatment 2: 97–112. https://doi.org/10.1007/BF02833226.